Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

USTATUS INPUT FOR MEAS_MON BLOCK

Created by: fazal hussain at: 8/4/2006 4:49 PM (1 Replies)

Rating (0)

Thanks 0

2 Entries

8/4/2006 4:49 PM	Rate (0)
fazal hussain Posts: 42 Rating: (0)	Hi, How can i use the USTATUS input of the Meas_Mon Block? Can i use this input for generating messages in the OS?
fazal hussain Posts: 42 Rating: (0)
Suggestion To thank Quote Answer

8/5/2006 8:57 AM	Rate (0)
Nemo Posts: 3149 Rating: (171)	Hi, check this: http://support.automation.siemens.com/WW/view/en/21400491 ********************************* 1.2.11.4 MEAS_MON: VSTATUS The 32-bit status word extends the status display in the block icons and faceplates. The 16 low bits (bits 0 - 15) are used by the block as follows: Bit no.: 7 6 5 4 3 2 1 0 Parameter - - - MSG_LOCK BA_EN OCCUPIED Bit no.: 15 14 13 12 11 10 9 8 Parameter OOS QMSG_SUP - - - - - - The 16-bit input USTATUS (data type WORD) uses the high bits (bits 16 - 31). These bits can be used freely. ******************************** If a bit in Vstatus is set, you can e.g. trigger an alarm in WinCC => just have try and create an alarm in Wincc, which is linked to the corresponding bit in vstatus... nemo
Nemo Posts: 3149 Rating: (171)
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on