Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

S5-S7 : 6FM1707-3AA10

Created by: rusli_rusli at: 4/29/2010 11:48 AM (2 Replies)

Rating (0)

Thanks 0

3 Entries

4/29/2010 11:48 AM	Rate (0)
rusli_rusli Bronze Member Joined: 3/31/2009 Last visit: 7/16/2024 Posts: 191 Rating: (3)	Dear Forum, I'm upgrading S5 to S7 and no experience with cam controoler, my question is : 1. can i replace 6FM1707-3AA10 with 6ES7352-1AH02-0AE0 ? 2. do i need FM352-5 modul to work with FM352 cam controller ? 3. what should i need to pay attention when working with cam controller? existing S5 configuration ( 2rack with IM305 ) : CPU-944B, 1 x 6FM1707-3AA10, 7 x DI 32 ch, 6 x DO 32 ch, IM305 Thank you Rusli

Suggestion To thank Quote Answer

5/31/2010 9:15 AM	Rate (0)
yokiar Posts: 36 Rating: (3)	Hi Rusli, You can find the guidance for both hardware and software coverting S5 to S7 below: https://support.automation.siemens.com/WW/llisapi.dll?func=cslib.csSearch&objaction=cssearch&lang=en&siteid=cseus&query=&query2=S5-S7&content=adsearch%2Fadsearch%2Easpx Hope will help you a lot. Cheers, Yoki
yokiar Posts: 36 Rating: (3)	Last edited by: yokiar at: 5/31/2010 9:27 AM
Suggestion To thank Quote Answer

5/31/2010 9:25 AM	Rate (0)
UMENCHO Diamond Expert Joined: 3/21/2006 Last visit: 11/1/2024 Posts: 10229 Rating: (1181)	Hello Rusli, 1. Yes you could replace. 2. No, you don't need FM352-5 modul. 3. Look at FM 352 Electronic Cam Controller Installation and Parameter Assignment V5.x or http://support.automation.siemens.com/WW/view/en/2103044 Best regards, Hristo Mihalev

Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on