Navigation

Simadyne communicatio with wincc ??

Created by: A9K at: 6/2/2010 9:03 AM (1 Replies)

6/2/2010 9:03 AM	Rate (0)
A9K Bronze Member Joined: 6/1/2010 Last visit: 7/9/2024 Posts: 160 Rating: (1)	Hello. i hav system simadyn-d with csh11 card which communicates with coros on Sinec-H1 protocoll. now i want to this communication on wincc v6 what should i do...... A9K
	A9K
Suggestion To thank Quote Answer

6/2/2010 10:21 AM	Rate (0)
KSN Platinum Expert Joined: 8/25/2006 Last visit: 11/17/2024 Posts: 2211 Rating: (280)	Hello! First of all, I want to ask you what software are you use to program Simadyn D: D7-SYS or Struc? If you use D7-SYS you will find information about communication to WinCC here. In both cases (D7-SYS or Struc) you will need the communication driver for WinCC (Simadyn D PMC Industrial Ethernet, order no. 2XV9450-1WC43-0AX0) and software Sinec-NML for programming CSH11. If you use Struc, as I know you will need additional library (special FB for communicate with WinCC). Of course you will need CP1613 in WinCC-station.
	Last edited by: KSN at: 6/2/2010 10:31 AM
Suggestion To thank Quote Answer
This contribution was helpful to 1 thankful Users miami