Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

Switch connection

Created by: nookamon at: 6/14/2010 4:17 AM (2 Replies)

Rating (3)

Thanks 2

3 Entries

6/14/2010 4:17 AM	Rate (0)
nookamon Posts: 8 Rating: (0)	I connect MP277 touch 10" with cpu 315-2dp redundancy Address of MPI 315-2dp(1) 2 315-2dp(2) 3 MP277 1 PG/PC 0 Now I want to know, how to switch connection MPI address 2 to 3 when cpu 315-2dp(1) error.
nookamon Posts: 8 Rating: (0)	Last edited by: nookamon at: 6/14/2010 4:17 AM
Suggestion To thank Quote Answer

6/14/2010 6:06 AM	Rate (3)
Saravana kumar Gold Member Joined: 2/6/2009 Last visit: 8/19/2024 Posts: 939 Rating: (118)	Dearnookamon, I have attached a document for your reference. In this document it is clearly given how to connect HMI with R-System. Revert back for any clarification. Attachment HMI & Redundant-System .pdf (356 Downloads)
	_______________________________________________________________ Best Regards T.Saravana Kumar "All for the Best"
Suggestion To thank Quote Answer
This contribution was helpful to 2 thankful Users how come Ayyappan

6/21/2010 4:46 AM	Rate (0)
nookamon Posts: 8 Rating: (0)	Thank you for your information now I can switch it
nookamon Posts: 8 Rating: (0)
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on