Navigation

ET200S without electronic module

Created by: jatska at: 1/3/2011 2:00 PM (1 Replies)

1/3/2011 2:00 PM	Rate (0)
jatska Posts: 21 Rating: (1)	Hi! A bit old thread but close to my question so I pop it up. I have an ET200S module and there´s empty places in the backplate, and they cant´t be empty in hw-config (at least I´ve heard so). So when I use dummy modules, do I have to configure them to Step7 hw-config also? Tried to find them from Step7 catalog without conclusion. Dummy module order number: 6ES7138-4AA11-0AA0.
jatska Posts: 21 Rating: (1)	Last edited by: Blue Moderator at: 03.01.2011 23:11 Last edited by: Blue Moderator at: 03.01.2011 23:10 Thread was splitted from an old thread (https://www.automation.siemens.com/WW/forum/moderators/PostReport.aspx?PostID=156050&Language=de&onlyInternet=False)
Suggestion To thank Quote Answer

1/4/2011 9:34 AM	Rate (0)
Wizard Diamond Expert Joined: 4/24/2006 Last visit: 11/18/2024 Posts: 8770 Rating: (1171)	Dear jatska, Perhaps this link might help: Why does the group error LED of the IM151 light on my ET 200S station when I plug in a reserve module? Here is manual: SIMATIC Distributed I/O System ET 200S Search for Option handling Best regards, Wizard

Suggestion To thank Quote Answer