Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

Active Power measurement in Simocode Pro-v with voltage measurement module

Created by: Sankar at: 2/1/2011 6:06 AM (1 Replies)

Rating (0)

Thanks 0

2 Entries

2/1/2011 6:06 AM	Rate (0)
Sankar Experienced Member Joined: 12/2/2010 Last visit: 4/2/2024 Posts: 61 Rating: (0)	Hi Guys! I have a Simocode Pro V with voltage measurement that I have configured. Cyclic send is set up for analog values bytes 4/5(Active Power P(H-word)), 6/7(Active Power P(L-word)), for active power.still i am unable to read power.
	Regards \ Sankar
Suggestion To thank Quote Answer

2/17/2011 10:57 AM	Rate (0)
LesPaul Posts: 467 Rating: (59)	hello Sankar, please check, if in Step 7 hardware configuration SIMOCODE has been configured as "Basic type 1" If you are not able to solve the problem, please contact: technical-assistance@siemens.com kind regards
LesPaul Posts: 467 Rating: (59)
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on