Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

MicroBox 420 OS XPe installation problem.

Created by: TechPLCs at: 2/2/2011 7:13 PM (2 Replies)

Rating (0)

Thanks 0

3 Entries

2/2/2011 7:13 PM	Rate (0)
TechPLCs Experienced Member Joined: 4/10/2008 Last visit: 10/16/2023 Posts: 19 Rating: (0)	Hello. I have a 6AG4040-0AG20-0XA0 without OS. I had tried so much to install Win XP embedded via Microsoft windows embedded studio but every time i faced blue screens finally. Any one can help me by the correct OS image file or *.slx file for XPe target Designer ? Waiting for your attention and kind ideas. Jafar
	Last edited by: Saleh at: 2/2/2011 7:16 PM
Suggestion To thank Quote Answer

4/6/2011 7:22 PM	Rate (0)
AmirAlwaled Posts: 148 Rating: (14)	Dear Saleh , You can download The last edition Microsoft Windows XP Embedded, SP2 Update Evaluation Edition It's My Help But I still need more information When Exactly you faced blue screen.
AmirAlwaled Posts: 148 Rating: (14)	Last edited by: AmirAlwaled at: 4/6/2011 7:24 PM
Suggestion To thank Quote Answer

4/12/2011 1:16 PM	Rate (0)
Sensorik Advanced Member Joined: 3/8/2011 Last visit: 11/18/2024 Posts: 49 Rating: (4)	Hello, what you can do is, you can send your microbox to your local siemens repaircenter to get the Win XP embedded version for your microbox. Please contact the repaircenter to get a respective offer from the repair center, With best reguards

Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on