Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

Is there not a way to export all symbols for the entire project including data blocks?

Created by: Wulfgar at: 6/23/2011 5:01 PM (1 Replies)

Rating (0)

Thanks 0

2 Entries

6/23/2011 5:01 PM	Rate (0)
Wulfgar Posts: 42 Rating: (3)	Aret There is a simplier way - open DB, select all, Ctrl+C, open excel, Ctrl+V Then use excel to get string T "Switch_data".Result out of Result field (built-in Conactenate function) - then you'll get resulting code:^) Not so simple if you have 100 or so data blocks. Is there not a way to export all symbols for the entire project including data blocks? Splitted from DB Symbols not appearing in Symbol Table.
Wulfgar Posts: 42 Rating: (3)	Last edited by: O_Moderator at: 6/24/2011 9:26 AM new subject after splitting Last edited by: O_Moderator at: 6/24/2011 9:26 AM new subject after splitting
Suggestion To thank Quote Answer

6/27/2011 8:19 AM	Rate (0)
Muldereric Regular Member Joined: 7/29/2009 Last visit: 10/20/2021 Posts: 16 Rating: (3)	No there is not. The fastest way to do this (i think) is either copy-paste it to Excel, or export all blocks to a SCL source and then manually process the text files you just generated.

Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on