Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

Use linear motor Mondial type MLM7-N1100AL47MAS3C with Simodrive 611U

Created by: Umbi at: 7/1/2011 12:17 PM (7 Replies)

Rating (0)

Thanks 0

8 Entries

7/1/2011 12:17 PM	Rate (0)
Umbi Advanced Member Joined: 4/8/2010 Last visit: 9/27/2024 Posts: 91 Rating: (0)	I have a problem to inserts parameter !
	Last edited by: Umbi at: 7/1/2011 12:17 PM
Suggestion To thank Quote Answer

7/8/2011 7:35 PM	Rate (0)
ŠΜS Silver Member Joined: 6/7/2010 Last visit: 7/9/2024 Posts: 571 Rating: (37)	Umbi I have a problem to inserts parameter ! Hi ... Explain it briefly.What parameter you can't enter.
	Regards, ŠΜS
Suggestion To thank Quote Answer

7/12/2011 11:09 AM	Rate (0)
Umbi Advanced Member Joined: 4/8/2010 Last visit: 9/27/2024 Posts: 91 Rating: (0)	I have error 724 when insert a linear motor parameter. Siemens hotline don't help me. He don't know a error cause Attachment ErroreSimodrive724.JPG (297 Downloads)
	Last edited by: Umbi at: 7/12/2011 11:09 AM
Suggestion To thank Quote Answer

7/12/2011 11:12 AM	Rate (0)
Umbi Advanced Member Joined: 4/8/2010 Last visit: 9/27/2024 Posts: 91 Rating: (0)	Attached used Simodrive parameter Attachment AsseLineare.zip (301 Downloads)

Suggestion To thank Quote Answer

7/16/2011 9:01 AM	Rate (0)
Ekalavya Posts: 2964 Rating: (482)	Hello..... Looks like the maximum motor pole pair number for the modules is not entered porperly..... 6SN1118–NK01–0AA0 or 6SN1118–NJ01–0AA0 is 64, otherwise 4 or 6. Could you check your motor pole pair properly this may solve your problem. Regards, Ekalavya
Ekalavya Posts: 2964 Rating: (482)
Suggestion To thank Quote Answer

7/16/2011 12:37 PM	Rate (0)
Umbi Advanced Member Joined: 4/8/2010 Last visit: 9/27/2024 Posts: 91 Rating: (0)	Siemens has told to me to change module with 1nh01 module for manage SIN/COS encoder next monday it arrived, and I try to change. But why alarm description it's not clear ?

Suggestion To thank Quote Answer

7/16/2011 12:43 PM	Rate (0)
Ekalavya Posts: 2964 Rating: (482)	Yes....agreed it is not clear.... Regards, Ekalavya
Ekalavya Posts: 2964 Rating: (482)
Suggestion To thank Quote Answer

7/29/2011 10:13 AM	Rate (0)
Umbi Advanced Member Joined: 4/8/2010 Last visit: 9/27/2024 Posts: 91 Rating: (0)	Now error is 505 ! Bha... Attachment Error505_1.JPG (318 Downloads)
	Last edited by: Umbi at: 7/29/2011 10:14 AM
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on