Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

Example of Pointer as a parameter for FC

Created by: TechFOX at: 1/3/2007 7:01 AM (1 Replies)

Rating (0)

Thanks 0

2 Entries

1/3/2007 7:01 AM	Rate (0)
TechFOX Posts: 13 Rating: (0)	Greetings, Please give an example of passing pointer as parameter to an FC such that i can evaluate the address. Is there any limitations on passing pointer as a parameter ?
TechFOX Posts: 13 Rating: (0)
Suggestion To thank Quote Answer

1/3/2007 9:26 AM	Rate (0)
Wizard Diamond Member Joined: 4/24/2006 Last visit: 11/12/2024 Posts: 8768 Rating: (1170)	Hello TechFOX, Here is a link to manual: http://support.automation.siemens.com/WW/view/en/18652056 Have a look at Chapter A.3.4 Here is an explanation about Pointer and ANY pointer. Perhaps it can help. Some extra links: http://support.automation.siemens.com/WW/view/en/22422092 http://support.automation.siemens.com/WW/view/en/2738030 http://support.automation.siemens.com/WW/view/en/22422028 Best regards, Wizard
	Last edited by: Wizard at: 1/3/2007 9:35 AM Some extra links.
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on