Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

Libraries for WINCC (TIA V10.5)?

Created by: RichardSapp at: 8/16/2011 2:22 PM (3 Replies)

Rating (0)

Thanks 0

4 Entries

8/16/2011 2:22 PM	Rate (0)
RichardSapp Posts: 24 Rating: (1)	Hi everybody! Could any one tell me where to look up for other graphic libraries for WINCC? I would like to go beyond the libraries included by default with the TIA V10.5 . I was expecting to be able to use some gauges and a wide variety of buttons. Is there any way to create new gauges or buttons? Im currently working with a 1214C and a KTP600. Thanks in advance!
RichardSapp Posts: 24 Rating: (1)
Suggestion To thank Quote Answer

8/16/2011 3:11 PM	Rate (0)
Sandman Platinum Member Joined: 4/29/2010 Last visit: 8/12/2024 Posts: 1557 Rating: (161)	Hello, do you mean in this case graphics or controls? Graphics can be added but not controls. best regards

Suggestion To thank Quote Answer

8/16/2011 3:24 PM	Rate (0)
RichardSapp Posts: 24 Rating: (1)	Hello, I mean that I would like to add things like this http://teroid-needle-gauge.lastdownload.com/teroid-needle-gauge7222.jpg But all I see in the libraries are very basic things... Regards
RichardSapp Posts: 24 Rating: (1)
Suggestion To thank Quote Answer

8/16/2011 3:30 PM	Rate (0)
Sandman Platinum Member Joined: 4/29/2010 Last visit: 8/12/2024 Posts: 1557 Rating: (161)	Okay i knew what you mean. Take a look at this FAQ: Gauge Controls for Basic Panels This is made with graphics and a graphiclist because a basic panel doesn`t support a real gauge control. But you can use your own graphics and build a own gauge in this way. best regards

Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Related topics by keywords:

TIA WinCC Adv Picture Controls

Follow us on