Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

Abort a Batch out of a SFC

Created by: silden at: 9/9/2011 8:15 PM (4 Replies)

Rating (0)

Thanks 0

5 Entries

9/9/2011 8:15 PM	Rate (0)
silden Posts: 5 Rating: (0)	Hallo, Ich stehen vor dem Problem, dass ich eine SFC den ihren aktiven Batch aborten soll. Es ist ein PCS7 V7.1 system mit S7 Batch und einer MES Verbindung. Danke
silden Posts: 5 Rating: (0)	Last edited by: O_Moderator at: 13.09.2011 09:37 Last edited by: O_Moderator at: 13.09.2011 09:01 subject edited after transfer to egnlish spoken forum
Suggestion To thank Quote Answer

9/12/2011 11:35 AM	Rate (0)
Silent Bob Posts: 836 Rating: (100)	hi... could you please write it iin eglish, i dont understand what you problem is
Silent Bob Posts: 836 Rating: (100)
Suggestion To thank Quote Answer

9/12/2011 11:02 PM	Rate (0)
silden Posts: 5 Rating: (0)	Oh my bad, OK the Problem is, My costumer want that the SFC type in a step abort the active Batch recepie, it means his own. The Sytem is a PCS7 V7.1 with Batch and a MES. Thank YOU
silden Posts: 5 Rating: (0)
Suggestion To thank Quote Answer

9/13/2011 10:16 AM	Rate (0)
Silent Bob Posts: 836 Rating: (100)	Couldn't you add a branch after that step, wich point to the end of the receipe? When your condition is fulfilled... all other steps are not executed and the receipe will end.
Silent Bob Posts: 836 Rating: (100)
Suggestion To thank Quote Answer

9/13/2011 6:16 PM	Rate (0)
silden Posts: 5 Rating: (0)	I now that, are the problem is, this has to be done in a case that the process is not sucsessfull. When I use a new branch down to the and the Batch will go on.
silden Posts: 5 Rating: (0)
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on