Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

6ES7138-4DE02-0AB0 SIMATIC DP, ELECTRONIC MODULE

Created by: Eastern at: 9/14/2011 1:10 PM (1 Replies)

Rating (0)

Thanks 1

2 Entries

9/14/2011 1:10 PM	Rate (0)
Eastern Posts: 557 Rating: (64)	Hi, Please can anybody provide me the plc program backup for below mention module for encoder. 6ES7138-4DE02-0AB0 SIMATIC DP, ELECTRONIC MODULE Counter module, 5V for once-only, endless and periodic counting, supports isochrone mode, V2.0 Regards
Eastern Posts: 557 Rating: (64)
Suggestion To thank Quote Answer

9/14/2011 1:58 PM	Rate (0)
Rated X Posts: 1547 Rating: (129)	Hello Eastern, I found a sample program atthis manual starting from page 133. You have to configure the modul in HW config and then read or writelike this: Network 2: Write to the control interface L DB1.DBD0 T PAD 256 Network 3: Read from the feedback interface L PED 256 T DB1.DBD8 http://support.automation.siemens.com/WW/view/en/9264111 I hope this will help you. Regards, Rated X
Rated X Posts: 1547 Rating: (129)	Last edited by: Rated X at: 9/14/2011 2:07 PM
Suggestion To thank Quote Answer
This contribution was helpful to 1 thankful Users giresh

|

Share this page:

Share this page on...

Follow us on