Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

encoder cable

Created by: ERSAN at: 9/17/2011 3:14 PM (2 Replies)

Rating (0)

Thanks 0

3 Entries

9/17/2011 3:14 PM	Rate (0)
ERSAN Posts: 1 Rating: (0)	Hello, The cable between 1PH7 motor and 6FX2003 encoder output connector is broken. What is the cable colour and pin assignment ?
ERSAN Posts: 1 Rating: (0)
Suggestion To thank Quote Answer

9/18/2011 11:01 AM	Rate (0)
Ekalavya Posts: 2964 Rating: (484)	Hello.... Cable specification what you have asked for the 1ph7 motor encoder looks to be wrong ...it should be 6FX5002 / 6FX2002 and rest information would like this xxxxxxx-2CA31-1BA0... Normally Encoder cable from Siemens looks in Green colour....confirm the type no??? Regards, Prakash
Ekalavya Posts: 2964 Rating: (484)
Suggestion To thank Quote Answer

10/5/2011 10:43 AM	Rate (0)
OvidiuNastac Silver Member Joined: 1/29/2008 Last visit: 7/26/2022 Posts: 419 Rating: (19)	Hi I have only the pin assignement but I think that's enough for you. Good luck Nit Attachment Encoder motor-driver cable.pdf (1150 Downloads)

Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on