Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

I can not use the Protool RT to monitor the system over profibus.

Created by: HansAndersen at: 2/5/2007 3:54 PM (1 Replies)

Rating (0)

Thanks 0

2 Entries

2/5/2007 3:54 PM	Rate (0)
HansAndersen Posts: 1 Rating: (0)	I want to control the system that included 5 PLC, 3 et200m and 3 op with protool RT over profibus.OPs will be designed in Protool. I will install a PC in the center of mile.And that PC control everything on the PLCs located in field via profibus. I have Step7 V5.3 SP3, Protool V6.0, CP5512.My question is what are the necesserities to manage that.
HansAndersen Posts: 1 Rating: (0)
Suggestion To thank Quote Answer

2/7/2007 11:30 AM	Rate (0)
The Brain Gold Member Joined: 10/19/2005 Last visit: 11/30/2020 Posts: 1611 Rating: (121)	Hi, did you know this FAQ => http://support.automation.siemens.com/WW/view/en/5362473 Maybe this could be a solution. greetings,

Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on