Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

OP7-simulation in Protool/lite and connecting with PLCSIM software

Created by: luciferC4 at: 2/15/2007 11:42 AM (3 Replies)

Rating (0)

Thanks 0

4 Entries

2/15/2007 11:42 AM	Rate (0)
luciferC4 Bronze Member Joined: 1/25/2006 Last visit: 11/6/2024 Posts: 257 Rating: (60)	Hello everybody, I wrote configure sofware for OP7-DP in Protool lite and I want to simulate this program. How can I do it? Can someone explane me how to start protoolRT nd simulate software witch I wrote for OP7? And is it possible somehow this simulation link with PLCSIM, with virtual PLC. I want to check how write/read location in PLC. Is it possible. Can I somehow bind protool RT and PLCSIM software. Protool is integrated in Step 7. Thank you in advance.

Suggestion To thank Quote Answer

2/15/2007 1:12 PM	Rate (0)
Wizard Diamond Expert Joined: 4/24/2006 Last visit: 11/6/2024 Posts: 8768 Rating: (1170)	Hi, I'm sorry, but you cann't simulate an OP7 project If you have a TP170B project, you can simulate and use PLCsim Best regards, Wizard
	Last edited by: Wizard at: 2/15/2007 1:16 PM
Suggestion To thank Quote Answer

2/15/2007 3:04 PM	Rate (0)
luciferC4 Bronze Member Joined: 1/25/2006 Last visit: 11/6/2024 Posts: 257 Rating: (60)	Thanks, Wizard.

Suggestion To thank Quote Answer

2/15/2007 3:15 PM	Rate (0)
Wizard Diamond Expert Joined: 4/24/2006 Last visit: 11/6/2024 Posts: 8768 Rating: (1170)	You are welcome Best regards, Wizard

Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on