Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

Web browser does not retain URL specified in properties

Created by: jasonr at: 3/29/2012 3:07 AM (3 Replies)

Rating (0)

Thanks 0

4 Entries

3/29/2012 3:07 AM	Rate (0)
jasonr Posts: 108 Rating: (2)	Hi, I am having a problem with the web browser object in WinCC professional V11. I created a web browser object on a screen and configured it with the following URL: http://192.168.65.223. This is the IP address of a device that provides a web server, which I intend to access through WinCC. After the web browser object had been placed on the screen and configured, I started a WinCC professional simulation. The web browser displayed the correct information, as expected. However, after ending that simulation, the next time I ran it again the URL in the web browser had changed to "about:blank". Every time the simulation has been started subsequently, the same problem has been encountered. This is not acceptable in this situation, because I do not want the toolbar of the web browser to be visible during runtime, so that it is not possible to make changes to the URL. Does anybody have any ideas about what might be going wrong? Thanks Jason :)
jasonr Posts: 108 Rating: (2)
Suggestion To thank Quote Answer

3/29/2012 11:10 AM	Rate (0)
Tweety Posts: 3037 Rating: (192)	Hello, Which Version of WinCC V11 do you use? Service Pack 2 for WinCC V11 Have you check it with a new project? Tweety
Tweety Posts: 3037 Rating: (192)
Suggestion To thank Quote Answer

3/29/2012 10:21 PM	Rate (0)
jasonr Posts: 108 Rating: (2)	Hi Tweety, I'm using WinCC V11 SP2. Strangely, the problem I described did not recur when I created a new web browser object. Perhaps I did something strange with the first one, but I have not had the same problem with any other web browser objects created since then. Thanks for replying anyway. Jason
jasonr Posts: 108 Rating: (2)
Suggestion To thank Quote Answer

3/30/2012 2:13 PM	Rate (0)
Tweety Posts: 3037 Rating: (192)	Hello, You can delete the folder "IM" in folder of your project. the folder "IM"is produced newly ifyou generate the next in WinCC 11. Then you can check the web browser objects. Tweety
Tweety Posts: 3037 Rating: (192)
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Related topics by keywords:

TIA WinCC Installation Options General

Follow us on