Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

Converting LIR_from S5 to S7

Created by: Mazen_ at: 4/7/2012 4:02 PM (11 Replies)

Rating (2)

Thanks 0

Result pages:: |; 1 | 2; |

12 Entries

Entries per page: 10 | all

4/9/2012 5:26 PM	Rate (0)
Mazen_ Advanced Member Joined: 12/16/2009 Last visit: 4/1/2021 Posts: 17 Rating: (0)	Hi TIBI68 I attached for u the S5 program our LIR in FB 14 and FB204 i appreciate you support. Attachment Modified BD1 backup with comments.zip (318 Downloads)

Suggestion To thank Quote Answer

4/10/2012 7:37 AM	Rate (1)
TIBI68 Gold Member Joined: 12/1/2009 Last visit: 10/27/2024 Posts: 672 Rating: (147)	Hi Mazen, I just had a quick look into your project. And I hope that you are not converting the blocks one by one from S5 into S7. Because:THEN YOU WILL FAIL! You havea project withCOROS. That means abunch of standard blocks which you cannotjust transfer straight into S7. SIEMENS has a migration packageand tools to convert these systems from S5 to S7 with much less effort. If you want to do this yourself manually you will have to do the whole system from scratch. Nothing is impossible.It all depends on yourexperienceon both systems. Good luck! Regards.
	Give us your feedback and show us your respect! We take our free time to support you with our knowledge and experience. If this post is helpfull to you kindly click on "Rate" or "Thank".
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on