Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

Get mouse position in WinCC Flexible 2008

Created by: Per Olof at: 4/14/2012 12:32 PM (3 Replies)

Rating (1)

Thanks 0

4 Entries

4/14/2012 12:32 PM	Rate (0)
Per Olof Posts: 311 Rating: (3)	Hello all, Is it possible to get the mouse position in WinnCC Flexible 2008 runtime ? I would like to always see the mosue position on the screen with help of a script that is running every 100 ms (or 1 s) Thanks Per Olof
Per Olof Posts: 311 Rating: (3)
Suggestion To thank Quote Answer

4/14/2012 3:07 PM	Rate (1)
umencho Diamond Member Joined: 3/21/2006 Last visit: 1/14/2025 Posts: 10239 Rating: (1182)	movable window or movable faceplate in run time with wincc flexible

Suggestion To thank Quote Answer

4/14/2012 11:04 PM	Rate (0)
Per Olof Posts: 311 Rating: (3)	Hello, Thanks for the answer. I read the thread. As I understood, there is no easy way to get the mouse position ... You need to write your own ActiveX controller ? Does anybody know any other ideas how to get the mouse posiotion within the WinCC window ? Thanks Per Olof
Per Olof Posts: 311 Rating: (3)
Suggestion To thank Quote Answer

4/16/2012 1:49 PM	Rate (0)
Tweety Posts: 3037 Rating: (192)	Hello, you can find all information about mouse position in WinCC flexiblein the link from Umencho. movable window or movable faceplate in run time with wincc flexible Tweety
Tweety Posts: 3037 Rating: (192)
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on