Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

Why isn't SINAMICS forum divided up.

Created by: Wild Bull at: 2/11/2011 10:32 PM (4 Replies)

Rating (1)

Thanks 0

5 Entries

2/11/2011 10:32 PM	Rate (0)
Wild Bull Posts: 30 Rating: (1)	The G120 family is completely different than the S120 Family. There is more than a dozen CU for the G120, with new ones comming out everyday. The G120 is doing MODBUS, HVAC, and building automation applications besides ProfiBus and ProfiNet. The S120 is completely different. The MicroMaster 440 uses Starter and is a SINAMICS drive and it has it own Forum. Presently I believe having the G120 and S120 together makes it to difficult to find relevant information,
Wild Bull Posts: 30 Rating: (1)
Suggestion To thank Quote Answer

2/14/2011 10:20 AM	Rate (1)
O_Moderator Diamond Member Joined: 4/24/2009 Last visit: 8/20/2024 Posts: 2682 Rating: (135)	Hello Wild Bull, basically you are right. But i think at the moment we will leave the conferences like they are. The reason for this is, that we would have many conferences, when we would split everything to new conferences.Just have a look at PCS7 or communication conference, there we also could split many things to many new conferences. And i think that with to much conferences it is also hard to find the right information. Hope you can understand this. Best regards O_Moderator
	Tips&Tricks for the forum usage
Suggestion To thank Quote Answer

4/17/2012 7:19 PM	Rate (0)
Vithani Platinum Member Joined: 7/8/2009 Last visit: 8/5/2024 Posts: 1976 Rating: (477)	Ohk Agreed about Not to open so many conferences and making things more complex rather than sorting out But what about sub confernece? Is it not possible to Make one confernece Sinamics and subconferences for G120 and S120? Just like Low-Voltage Controls have Industrial Controls and Low-Voltage Power Distribution and Installation Technology as sub conference
	I dont Like people driving Fast, thats the reason I overtake them ;)
Suggestion To thank Quote Answer

4/18/2012 12:01 PM	Rate (0)
O_Moderator Diamond Member Joined: 4/24/2009 Last visit: 8/20/2024 Posts: 2682 Rating: (135)	Hello, at the moment we are trying to clean up the drives-conference SINUMERIK / SIMODRIVES / MASTERDRIVES / SIMOTION / SINAMICS. And also we have at the moment something different to do. When we decide to splitt the conference into more smaller conferences we will do this by subconferences, but i am not sure if this will be done. We will decide about this in future. Best regards O_Moderator
	Tips&Tricks for the forum usage
Suggestion To thank Quote Answer

4/18/2012 3:57 PM	Rate (0)
Vithani Platinum Member Joined: 7/8/2009 Last visit: 8/5/2024 Posts: 1976 Rating: (477)	O_Moderator And also we have at the moment something different to do. I know I know.... I was talking about future only coz I know this month you are going to be very very busy But keep it in the list of suggestions I think just like Things which should be fixed in Forum., we should create one common thread for suggestions only... Discussion on that suggestion can be done on seperate threads Regards Devesh Vithani
	I dont Like people driving Fast, thats the reason I overtake them ;)
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on