Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

Cable Assignment

Created by: makas11 at: 1/13/2007 1:44 AM (7 Replies)

Rating (0)

Thanks 1

8 Entries

1/13/2007 1:44 AM	Rate (0)
makas11 Posts: 1 Rating: (0)	Hi to All members I'm new in this forum,& I'd like to ask a question & hope to reply it I want to know,If I want to download a program from ProTool to the simatic panel,is the cable is looks like the MPI for example? & If it's a normal serial one I like to know the pin assignment for that cable,,, I will be waiting for your reply as soon as possible Best Regards;
makas11 Posts: 1 Rating: (0)
Suggestion To thank Quote Answer

1/13/2007 2:21 PM	Rate (0)
Nemo Posts: 3149 Rating: (171)	Hi, which OP do you have...there are already some FAQ concerning this issue http://support.automation.siemens.com/WW/view/en/21401061 nemo
Nemo Posts: 3149 Rating: (171)
Suggestion To thank Quote Answer

2/6/2007 9:29 PM	Rate (0)
ashkya Posts: 4 Rating: (0)	Hey, By using RS232 9pin to 15pin D typeyou can download through com port, for that you have to select com port and baud rate 9600 bps while downloading. Pin configuration can be found under Protool help.
ashkya Posts: 4 Rating: (0)
Suggestion To thank Quote Answer

2/26/2007 2:37 PM	Rate (0)
NewTech Bronze Member Joined: 2/23/2007 Last visit: 2/19/2023 Posts: 75 Rating: (1)	I need exactly help, but i look on ProTool Help and Siemens link and not found, because i am using TD17 DB15 to PC DB9 connection. I found only DB9 vs DB9 cable.. I found it, but I am not certain http://www.control.com/1026204524/index_html somebody can be design a correct connection?? Thanks for all,
	Last edited by: NewTech at: 26.02.2007 14:39
Suggestion To thank Quote Answer

2/26/2007 3:59 PM	Rate (0)
Wizard Diamond Expert Joined: 4/24/2006 Last visit: 11/18/2024 Posts: 8770 Rating: (1171)	Hi, Here is a link to manual: http://support.automation.siemens.com/WW/view/en/1137086 Have a look at page E-10. Best regards, Wizard

Suggestion To thank Quote Answer
This contribution was helpful to 1 thankful Users Mark_F

2/26/2007 6:27 PM	Rate (0)
NewTech Bronze Member Joined: 2/23/2007 Last visit: 2/19/2023 Posts: 75 Rating: (1)	¨Thanks, but i need a diagram 6XV1 440-2K for exactly this example: https://support.automation.siemens.com/WW/llisapi.dll?query=6XV1+440-2K&func=cslib.cssearch&content=skm%2Fmain.asp&lang=en&siteid=cseus&objaction=cssearch&searchinprim=0&nodeid0=10805615&x=25&y=10

Suggestion To thank Quote Answer

2/27/2007 10:12 AM	Rate (0)
Wizard Diamond Expert Joined: 4/24/2006 Last visit: 11/18/2024 Posts: 8770 Rating: (1171)	NewTech ¨Thanks, but i need a diagram 6XV1 440-2K for exactly this example: https://support.automation.siemens.com/WW/llisapi.dll?query=6XV1+440-2K&func=cslib.cssearch&content=skm%2Fmain.asp&lang=en&siteid=cseus&objaction=cssearch&searchinprim=0&nodeid0=10805615&x=25&y=10 Hello NewTech, I don't know which example you mean. But have a look at earlier mentioned manual page E-10. This is cabel 6XV1 440-2K... Best regards, Wizard

Suggestion To thank Quote Answer

3/7/2007 1:28 PM	Rate (0)
NewTech Bronze Member Joined: 2/23/2007 Last visit: 2/19/2023 Posts: 75 Rating: (1)	Thanks, now i learn how to find the cables schema, because i already it had manual... Thanks

Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on