Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

Why can't I integrate an 4 F-DO in my reaction frame?

Created by: S.M. de Vos at: 3/15/2012 11:04 AM (2 Replies)

Rating (0)

Thanks 0

3 Entries

3/15/2012 11:04 AM	Rate (0)
S.M. de Vos Posts: 1 Rating: (0)	Why can't I integrate an 4 F-DO in my reaction frame? It is possible to select an 1f-RO into my project at the reaction frame but I thought that it would also be safe to integrate an F-DO.... what am I doing wrong?
S.M. de Vos Posts: 1 Rating: (0)
Suggestion To thank Quote Answer

3/15/2012 11:13 AM	Rate (0)
james12 Advanced Member Joined: 6/21/2010 Last visit: 11/5/2024 Posts: 42 Rating: (8)	Hello, 4-F-DO belongs to evaluation part. Same like F-DI. Greetings James

Suggestion To thank Quote Answer

4/30/2012 2:18 PM	Rate (0)
Eastern Posts: 557 Rating: (64)	Hello, F-DO is failsafe digital output module, if you are using F-DO then you should use 1F RO module. this is failsafe relay which is mount on ET 200S bus used. Regards
Eastern Posts: 557 Rating: (64)
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on