Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

Changing PLC IP

Created by: Manish_Soni at: 5/22/2012 6:19 AM (4 Replies)

Rating (0)

Thanks 0

5 Entries

5/22/2012 6:19 AM	Rate (0)
Manish_Soni Posts: 41 Rating: (0)	Hi , I have following PLC. CPU 315-2 PN/DP-> 6ES7 315-2EH13-0AB0. Could anyone please help me how can i change the Controller IP. Thanks, Manish.
Manish_Soni Posts: 41 Rating: (0)
Suggestion To thank Quote Answer

5/22/2012 6:23 AM	Rate (0)
manmeet Gold Member Joined: 1/3/2006 Last visit: 2/19/2024 Posts: 726 Rating: (71)	Hi In hardware configuration double click on PN-IO, in there you will find the IP settings See attached file Attachment IP.jpg (67 Downloads)
	Last edited by: manmeet at: 5/22/2012 6:26 AM
Suggestion To thank Quote Answer

5/22/2012 7:29 AM	Rate (0)
Darius Platinum Member Joined: 9/28/2005 Last visit: 11/5/2024 Posts: 2957 Rating: (242)	Hi, Also look this FAQ How do you reset the IP address and device name of an I device? This could be quite helpful
	Best regards, Darius
Suggestion To thank Quote Answer

5/22/2012 7:46 AM	Rate (0)
Ton Verra Gold Member Joined: 4/20/2007 Last visit: 11/7/2024 Posts: 728 Rating: (43)	Remember that if you change your IP adress from a PN-supervisor, but do not change it in the Hardware, the adress will be changed back to the old one with a reboot.

Suggestion To thank Quote Answer

5/29/2012 8:45 AM	Rate (0)
Manish_Soni Posts: 41 Rating: (0)	Hi Friends, Thanks. I have changed the ip of PLC. One more thing, [snip] ... Thanks, Manish
Manish_Soni Posts: 41 Rating: (0)	Last edited by: CS Moderator at: 5/30/2012 2:15 PM new question split to seperate thread /tf/WW/en/Posts/75486#top
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on