Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

how to create virtual connections cfc on fm 458?

Created by: FAJAR.ROBERTO at: 7/16/2012 8:27 AM (3 Replies)

Rating (0)

Thanks 0

4 Entries

7/16/2012 8:27 AM	Rate (0)
FAJAR.ROBERTO Advanced Member Joined: 6/16/2012 Last visit: 8/13/2024 Posts: 28 Rating: (0)	help me expert how to create a virtual connection on fm 458? I've tried but it always appears an error message like the picture that I attach below so how to create a virtual connection on fm 458 Regard's Fajar Roberto Attachment error cfc fm 458.JPG (243 Downloads)

Suggestion To thank Quote Answer

7/16/2012 8:56 AM	Rate (0)
KSN Platinum Expert Joined: 8/25/2006 Last visit: 11/11/2024 Posts: 2211 Rating: (280)	Hello. If you mean function blocks CRV/CTV, then right click on connector CRR/CRT and select in dropdown menu 'Interconnection to Address', then type the name of virtual connection (max. 6 symbols).

Suggestion To thank Quote Answer

7/16/2012 12:08 PM	Rate (0)
FAJAR.ROBERTO Advanced Member Joined: 6/16/2012 Last visit: 8/13/2024 Posts: 28 Rating: (0)	Mr I've tried to like it but still no error message Rgd's fajar roberto Attachment error.JPG (197 Downloads)

Suggestion To thank Quote Answer

7/16/2012 12:20 PM	Rate (0)
KSN Platinum Expert Joined: 8/25/2006 Last visit: 11/11/2024 Posts: 2211 Rating: (280)	Hello. This error message tells you that you create virtual connection name at connector CRT of function block CTV (20.CRT), but this virtual connection does not used in the program. After creating a virtual connection name at CTV/CRV block you should create at least 1 virtual connection at any other function block (at input connector for CRV, and at output connector for CTV). For this right-click at any in/out connector of some function block, then select 'Interconnection to Address', then select 'Virtual connection', then select in drop-down list the name of your virtual connection and type a sequence number. Look at attachment. You may read about how to operate with virtual connections in the manual of Simadyn D. Go to the Start-Simatic-Documentation-English and find the manual 'D7-SYS - SIMADYN D System and communication configuring', find the chapter 'Communications utility process data'. Attachment screen.jpg (240 Downloads)
	Last edited by: KSN at: 7/16/2012 12:54 PM
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on