Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

AS Download in Run-Mode - Gives problem @ CPU 1 - Always

Created by: alibaba at: 4/1/2007 11:54 AM (1 Replies)

Rating (0)

Thanks 0

2 Entries

4/1/2007 11:54 AM	Rate (0)
alibaba Posts: 90 Rating: (1)	Hi there, I'm having AS:CPU 417-4H with RACK 0 & RACK 1 >> connected to PCS7 V6.1 SP1. My problem is when we add some new AS-i slaves or PA devices and download in Run-mode. Always CPU 0 goes in RUN-MODE. But, CPU-1 stays in STOP-MODE and never switch on again. Any help?? Thanx, aLiBaBa
alibaba Posts: 90 Rating: (1)	Last edited by: alibaba at: 01.04.2007 11:57
Suggestion To thank Quote Answer

4/18/2007 6:27 AM	Rate (0)
alibaba Posts: 90 Rating: (1)	We finally reach a solution and did the following: Switch the STBY CPU to STOP MODE. Download in STOP-MODE. Select the STBY CPU to download to as destination. Once download is done, use the option ‘SWICH TO’ from operating-mode under PLC menu. This will switch and become the STBY CPU as new MASTER and old MASTER CPU will go to STOP-MODE. From operating menu again à Select the new STBY CPU that is should be in STOP-MODE and select it as WARM-RESTART. Please see attach manual…Thanx, alibaba Attachment download_in_run_mode.pdf (571 Downloads)
alibaba Posts: 90 Rating: (1)
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on