Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

HOW TO ASSIGN TOGGLE OPERATION TO PUSHBUTTON WITHOUT SCRIPTS

Created by: patel at: 3/10/2011 11:58 AM (5 Replies)

Rating (0)

Thanks 2

6 Entries

3/10/2011 11:58 AM	Rate (0)
patel Posts: 134 Rating: (2)	Hi.. I am quite new to WINCC...I want to configure a button from either standad objects or control objects whatever..i want to operate this button in toggle operation. is it possible to do it without scripts? if yes then pls let me know how... If i need to take button from wincc library for that,let me know from where in library? Also let me know which C-script i need to use for this?
patel Posts: 134 Rating: (2)
Suggestion To thank Quote Answer
This contribution was helpful to 1 thankful Users SD_CDSPL

3/10/2011 12:17 PM	Rate (0)
April Posts: 1776 Rating: (95)	Hi, i found this FAQ for you http://support.automation.siemens.com/WW/view/en/19478679
April Posts: 1776 Rating: (95)
Suggestion To thank Quote Answer

3/14/2011 9:54 AM	Rate (0)
efka Posts: 799 Rating: (43)	Dear patel, if you really want to toggle the bit in the classic way, the solution of April is the easiest. But maybe it is enough for you, when the tag is set by pressing the button and it is resetted by leavong the button. If yes, you can solve this with Direct Connections to the events "Press Left" and "Leave left". best regards
efka Posts: 799 Rating: (43)
Suggestion To thank Quote Answer

3/15/2011 10:22 AM	Rate (0)
patel Posts: 134 Rating: (2)	Hi... Thnx for the answer..Ya i tried it but when dialog for direct connection opens,what property do i need to select for button.Ya i know that i need to select on :press left" and release left" but i cant find out the functions which is to be perform on respective mouse action...i cant find out anyfunction in the list like"set bit" or "reset bit" or "invert bit" etc... if possible can u show that with snaps?
patel Posts: 134 Rating: (2)
Suggestion To thank Quote Answer

3/15/2011 10:27 AM	Rate (0)
efka Posts: 799 Rating: (43)	Dear patel, see my screenshot attached. Just use the "constant" option. Use 1 by pressing the button and 0 by releasing the button. Just easy Attachment direct_connection.JPG (1247 Downloads)
efka Posts: 799 Rating: (43)
Suggestion To thank Quote Answer

8/18/2012 2:57 AM	Rate (0)
ravirz Posts: 1 Rating: (0)	Thank you so much Silver Expert in your very good idea about this....
ravirz Posts: 1 Rating: (0)
Suggestion To thank Quote Answer
This contribution was helpful to 1 thankful Users S_Moderator

|

Share this page:

Share this page on...

Related topics by keywords:

WinCC Picture Controls

Follow us on