Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

Control based on time of day

Created by: t-dub at: 4/24/2007 2:31 PM (6 Replies)

Rating (6)

Thanks 0

7 Entries

4/24/2007 2:31 PM	Rate (0)
t-dub Posts: 8 Rating: (0)	I would like to use a LOGO as a time clock to control an output (Q1) which will operate a bell for 3 sec. as a call to work or at break time, noon, etc. So, at 12:00PM, the bell would ring for 3 seconds. At 1:00PM, the bell would ring for 3 seconds... etc. There are twelve different times I would like the bell to ring. Does a LOGO have the functionality to control an output based on the time of day?
t-dub Posts: 8 Rating: (0)
Suggestion To thank Quote Answer

4/24/2007 3:04 PM	Rate (0)
Wizard Diamond Member Joined: 4/24/2006 Last visit: 11/12/2024 Posts: 8768 Rating: (1170)	Hi t-dub, You can use the 'weekly timer', see special functionsand a timer. Best regard, Wizard

Suggestion To thank Quote Answer

4/24/2007 3:38 PM	Rate (0)
t-dub Posts: 8 Rating: (0)	I reviewed the Weekly Timer function. From what I can see, you can only set it by minutes, and not seconds. I need the alarm to go off for only 3 seconds, and not any longer. Any ideas?
t-dub Posts: 8 Rating: (0)
Suggestion To thank Quote Answer

4/24/2007 3:49 PM	Rate (2)
Wizard Diamond Member Joined: 4/24/2006 Last visit: 11/12/2024 Posts: 8768 Rating: (1170)	Hello t-dub, When you use Weekly timer, you should also use 'wiping relay (pulse output)' So you start the weekly timer at 12.00 and stop it at 12.01 and the wiping relay you give parameter: 3 sec. pulse output. Best regards, Wizard

Suggestion To thank Quote Answer

4/24/2007 4:03 PM	Rate (0)
t-dub Posts: 8 Rating: (0)	Thanks for your prompt responses! I really appreciate your help.
t-dub Posts: 8 Rating: (0)
Suggestion To thank Quote Answer

4/24/2007 4:03 PM	Rate (2)
KLooPY Posts: 38 Rating: (5)	Hi t-dub see the attach to understand how you have to do it Attachment ex.zip (871 Downloads)
KLooPY Posts: 38 Rating: (5)
Suggestion To thank Quote Answer

4/24/2007 4:39 PM	Rate (2)
Wizard Diamond Member Joined: 4/24/2006 Last visit: 11/12/2024 Posts: 8768 Rating: (1170)	t-dub Thanks for your prompt responses! I really appreciate your help. Hi t-dub, You are welcome Greetings, Wizard

Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Related topics by keywords:

Follow us on