4/27/2009 11:22 AM | |
Posts: 2930 Rating:
|
Hi, try tochange NW2: EN: replace SM0.0 by your Input Start: put a positive agde behind your input Regards Helmut |
4/28/2009 9:46 AM | |
Posts: 5 Rating:
|
Thanks Helmut, it works! |
9/13/2012 12:16 AM | |
Posts: 2 Rating:
|
have the same problem. The configuration is correct transferred, but in the Ethernetinformation it's all 0 ! |
Follow us on