Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

Master en and Master with slave logo's

Created by: Oortjes at: 9/23/2012 12:41 PM (1 Replies)

Rating (0)

Thanks 0

2 Entries

9/23/2012 12:41 PM	Rate (0)
Oortjes Posts: 3 Rating: (0)	Hello, I have the following issue: I have 1 logo 7 with 2 slave logo's. Master ip: 192.168.1.11, slave ip's 192.168.1.12 and 192.168.1.13. The program I have written for this logo exceeds the 400 blocks. To extend the program a want to use a new master logo with ip 192.168.1.14. My question is: can i use in the software for the second master logo analog inputs from one of the slave logo's? example: NAI3 (analog input from 192.168.1.13) that is in use bij master logo 192.168.1.12, i want to use that input as an VB in master logo 2.
Oortjes Posts: 3 Rating: (0)
Suggestion To thank Quote Answer

9/27/2012 2:21 PM	Rate (0)
desmul24 Posts: 378 Rating: (73)	Hello Oortjes, You can add LOGO with server and client configuration but you can not map analog input to binary variable VB, you should map to word memory VW first. Regards,
desmul24 Posts: 378 Rating: (73)
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Related topics by keywords:

Follow us on