Navigation

MSSQL$WINCCFLEXEXPRESS not running???

Created by: Mark BlewittatOberlin at: 4/20/2012 4:25 PM (25 Replies)

Rating (1)

Thanks 1

Result pages:: |; 1 | 2 | 3; |

26 Entries

Entries per page: 10 | 20 | all

4/26/2012 6:09 PM	Rate (0)
Darius Platinum Expert Joined: 9/28/2005 Last visit: 11/5/2024 Posts: 2957 Rating: (242)	Mark BlewittatOberlin Hi Darius, many thanks for your help. I think I am at the stage now to give up, try and support my existing customers with an old laptop and a 32bit install of WinCC, the one which works with AB, Omron, Horner, etc...and only use this new one with AB and TIA Portal, not sure who I hate the most at the moment Micro$oft or Siemens:) Thanks for all of your help any way. Mark Sad to hear . I wanted this to be solved, but this is not my computer and I can have it on the table . On the other hand I know what it means when you need to go to the customer/write program, but your laptop doesn't like you . This is crazy.
	Best regards, Darius
Suggestion To thank Quote Answer

4/27/2012 10:00 AM	Rate (0)
Mark BlewittatObe... Advanced Member Joined: 4/18/2012 Last visit: 9/9/2024 Posts: 28 Rating: (0)	Always a problem when one supplier relies on the product of another, you just end up bouncing blame around and not solving the poroblem. Ho Hum, lesson learnt. Thanks again. Mark

Suggestion To thank Quote Answer
This contribution was helpful to 1 thankful Users Darius

7/12/2012 10:47 PM	Rate (0)
HaLTech Posts: 2 Rating: (0)	windows Xp Professional SP3 Version 2002 installing wincc flexible 2008 sp2 I am getting Make sure that the service mssql$winccflexexpress is running and not disabled. I went toRun and type in services.msc... I can't find any sql service running to see who the owner is...
HaLTech Posts: 2 Rating: (0)	Last edited by: HaLTech at: 7/12/2012 10:52 PM
Suggestion To thank Quote Answer

7/13/2012 9:53 AM	Rate (0)
Tweety Posts: 3037 Rating: (192)	Hello, Do you check all points in this following FAQ. What are the possible causes of an unsuccessful Microsoft SQL Server 2005 Express installation or why is creating or opening a WinCC flexible 2008 project aborted? Tweety
Tweety Posts: 3037 Rating: (192)
Suggestion To thank Quote Answer

2/13/2013 10:48 PM	Rate (0)
Abdelbasset Member Joined: 2/7/2013 Last visit: 2/25/2023 Posts: 2 Rating: (0)	Hi Mark I have got this message also on Windows 7 32 bits but after days of googling about SQL server I manage to run WINCC Flexible 2008 SP3 on Windows 7 reinstalling the windows is better but if you just folow the steps it should helps too 1- uninstall All the SQL server data from the computer 2-reinstall SQL server from \\InstSata\SQLExpress 3-don't use default instance (rename the instance ""WINCCFLEXEXPRESS"") continue the instalation and it is done

Suggestion To thank Quote Answer

3/21/2013 8:47 AM

Rate (0)

MAkos

Regular Member

Joined: 7/24/2007

Last visit: 12/3/2020

Posts: 1

Rating:

(0)

What should you watch out for when installing WinCC flexible 2008 SP3 or WinCC V11 SP2 on an HP notebook?

escription
With the installation of Service Pack 3 for WinCC flexible 2008 on HP notebooks there are incompatibilities with the HP keyboard driver.

The following products are affected:

SIMATIC WinCC flexible 2008 SP3 Compact/Standard/Advanced
SIMATIC WinCC flexible 2008 SP3 Runtime

Productsnotaffected:
New corrected DVDs have been supplied since May 2012 for WinCC Comfort/Advanced/Professional and WinCC Runtime Advanced. The corrected version is indicated by the overprintV11 SP2 SE incl. Update 2on the DVD. This DVD eliminates the need for the procedure below.

Remedy
There are two alternatives for avoiding this incompatibility. Either you uninstall the HP keyboard driver or you uninstall the keyboard driver that is installed with WinCC flexible Runtime or the simulation.
Both alternatives must be executed at the latest before the concluding restart of the PC after installation of WinCC flexible 2008 SP3.

If the restart after installation has already been made and the system no longer starts or you have a blue screen, follow the instructions given under "Run_Windows_Repair".

The alternatives are described below each with their advantages and disadvantages.

See:

http://support.automation.siemens.com/WW/llisapi.dll?func=cslib.csinfo&objId=58344658&load=treecontent&lang=en&siteid=cseus&aktprim=0&objaction=csview&extranet=standard&viewreg=WW

Created by: Mark BlewittatOberlin at: 4/20/2012 4:25 PM (25 Replies)

Rating (1) Thanks 1

26 Entries

Entries per page: 10 | 20 | all

This contribution was helpful to

Last edited by: HaLTech at: 7/12/2012 10:52 PM

26 Entries

Entries per page: 10 | 20 | all

All about SIMATIC WinCC flexible

Follow us on

Rating (1)

Thanks 1