Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

Wincc Flex Text List is not updating properly

Created by: viralpatel at: 6/21/2013 6:49 AM (16 Replies)

Rating (3)

Thanks 0

Result pages:: |; 1 | 2; |

17 Entries

Entries per page: 10 | all

6/28/2013 9:51 AM	Rate (0)
Tweety Posts: 3037 Rating: (192)	Hello, Do you have this effect at other project too or only atthis project? Tweety
Tweety Posts: 3037 Rating: (192)
Suggestion To thank Quote Answer

6/28/2013 10:36 AM	Rate (1)
Ayman Elotaify Platinum Member Joined: 5/28/2008 Last visit: 11/6/2024 Posts: 4516 Rating: (839)	Hello, Please try to reset your WinCC flexible to its orignal status using the following link. How can you reset WinCC flexible to the original status of the last installation? And please tell us a feedback. It's a very strange problem I never faced with winCC flexible 2008 and even from 2007!!
	Ayman Elotaify
Suggestion To thank Quote Answer

6/28/2013 10:48 AM	Rate (0)
viralpatel Silver Member Joined: 11/18/2010 Last visit: 8/5/2022 Posts: 523 Rating: (32)	Hi , I have faced this problem only ones but same problem is faced by my department colleague also Butweare not facing this problem every time. one more thing i am working with software in VMware application, viral patel
	Last edited by: viralpatel at: 6/28/2013 10:49 AM
Suggestion To thank Quote Answer

6/28/2013 11:07 AM	Rate (0)
ALGUDKAR RAO Posts: 621 Rating: (10)	viralpatel Hi all, i am normally generating text list for wincc flex by import from external file but if required when i have to make any change in text list -text by manually ii won't reflact in HMI runtime eventhough this it will take value properly and this thing not happen every time .so to update it i have to change external csv file then required to reimport it ,can you please give me any idea what would be the reason viral how you are assign the tag..? whether visible text are enable
ALGUDKAR RAO Posts: 621 Rating: (10)
Suggestion To thank Quote Answer

7/1/2013 6:26 AM	Rate (0)
viralpatel Silver Member Joined: 11/18/2010 Last visit: 8/5/2022 Posts: 523 Rating: (32)	Algudkar viralpatel Hi all, i am normally generating text list for wincc flex by import from external file but if required when i have to make any change in text list -text by manually ii won't reflact in HMI runtime eventhough this it will take value properly and this thing not happen every time .so to update it i have to change external csv file then required to reimport it ,can you please give me any idea what would be the reason viral how you are assign the tag..? whether visible text are enable sorry, i am not getting what you are telling? viral patel

Suggestion To thank Quote Answer

7/2/2013 2:04 PM	Rate (0)
Tweety Posts: 3037 Rating: (192)	Hello, Which operating system do you use? Windows XP or Windows 7 Tweety
Tweety Posts: 3037 Rating: (192)
Suggestion To thank Quote Answer

7/3/2013 6:45 AM	Rate (0)
viralpatel Silver Member Joined: 11/18/2010 Last visit: 8/5/2022 Posts: 523 Rating: (32)	Tweety Hello, Which operating system do you use? Windows XP or Windows 7 Tweety windows XP on virtual m/c VP

Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on