Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

FC112 ("GetLEDState")

Created by: @shish at: 7/1/2013 12:22 PM (33 Replies)

Rating (1)

Thanks 6

Result pages:: |; 1 | 2 | 3 | 4; |

34 Entries

Entries per page: 10 | 20 | all

7/5/2013 11:05 AM	Rate (0)
Karls1 Posts: 139 Rating: (5)	@shish find the attachment. first, I check with the attached program, I found 8085 at RET_VAL with SZL_ID w#16#119. Then I deleted nw-2 and comperator in nw-3, and checked with SZL_ID w#16#174 then at RET_VAL I found 8081. kindly check ! Hi, update after you test and return value, thanks! Attachment Getledst.zip (212 Downloads)
Karls1 Posts: 139 Rating: (5)	Last edited by: C.kt at: 7/5/2013 11:08 AM
Suggestion To thank Quote Answer

7/5/2013 11:07 AM	Rate (0)
Karls1 Posts: 139 Rating: (5)	Hello, Additional Explanation on attach. Attachment LEDstates.pdf (249 Downloads)
Karls1 Posts: 139 Rating: (5)
Suggestion To thank Quote Answer

7/5/2013 11:15 AM	Rate (0)
@shish Bronze Member Joined: 9/16/2011 Last visit: 6/20/2024 Posts: 291 Rating: (6)	Thank you dearC.kt, I am just checking the program. also tell me, how to Increase DR to 26 ?
	Reg, @shish --- If satisfied with reply, Rate it ! If problem solved, hit THANK !
Suggestion To thank Quote Answer

7/5/2013 11:21 AM	Rate (0)
Karls1 Posts: 139 Rating: (5)	@shish Thank you dearC.kt, I am just checking the program. also tell me, how to Increase DR to 26 ? Please check in my attach sample program. Open FB200 , check DR in stat interface (data record that return from sucessful call SFC 51) , i already increase size to 30. DR := Array [0..30] of UDT1.
Karls1 Posts: 139 Rating: (5)
Suggestion To thank Quote Answer

Result pages:: |; 1 | 2 | 3 | 4; |

34 Entries

Entries per page: 10 | 20 | all

|

Share this page:

Share this page on...

Follow us on