Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

WinCC Flexible 2007 and 2008 Problem!

Created by: Ing. Hass at: 9/10/2013 7:37 PM (2 Replies)

Rating (1)

Thanks 0

3 Entries

9/10/2013 7:37 PM	Rate (0)
Ing. Hass Posts: 50 Rating: (0)	Hi good day, I write because it presented several problems with WinCC Flexible 2007 and 2008 because by doing projects with the Runtime, and place user security keys work fine but when rebooting the computer or spend time these keys recognizes them and I have to leave the runtime and open the program from the WinCC Flexible and replace keys, save the file and run the Runtime to re-recognize the user keys the same way about me Operator Panels OP I have to return to them to load the program because at some time the keys are not recognized, I appreciate your help on the problem, thanks, greetings
Ing. Hass Posts: 50 Rating: (0)
Suggestion To thank Quote Answer

9/11/2013 11:16 AM	Rate (1)
Tweety Posts: 3037 Rating: (192)	Hello, You can use the function "Rebuild all" in WinCC flexible at this behaviour. Tweety
Tweety Posts: 3037 Rating: (192)
Suggestion To thank Quote Answer

9/11/2013 9:45 PM	Rate (0)
Ing. Hass Posts: 50 Rating: (0)	Thank you very much for your help greetings!
Ing. Hass Posts: 50 Rating: (0)
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on