Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

there is communication with MSS 3RK **** sirius in ethernet?

Created by: rdoliveira at: 8/29/2013 3:21 PM (9 Replies)

Rating (1)

Thanks 1

10 Entries

8/29/2013 3:21 PM	Rate (0)
rdoliveira Gold Member Joined: 4/26/2012 Last visit: 11/5/2024 Posts: 1560 Rating: (169)	There is some product? there is communication with MSS 3RK **** sirius in ethernet?
	"Always make a backup before and check the best time before testing." Obrigado.
Suggestion To thank Quote Answer

8/29/2013 3:39 PM	Rate (0)
LesPaul Posts: 467 Rating: (59)	hello rdoliveira, with MSS 3RK only PROFIBUS is possible. regards LesPaul
LesPaul Posts: 467 Rating: (59)
Suggestion To thank Quote Answer

8/29/2013 3:57 PM	Rate (0)
rdoliveira Gold Member Joined: 4/26/2012 Last visit: 11/5/2024 Posts: 1560 Rating: (169)	OK, and do you know if it is possible to have in the future?
	"Always make a backup before and check the best time before testing." Obrigado.
Suggestion To thank Quote Answer

8/29/2013 4:03 PM	Rate (0)
LesPaul Posts: 467 Rating: (59)	no,Ethernet is definitely not planned with MSS. LesPaul
LesPaul Posts: 467 Rating: (59)
Suggestion To thank Quote Answer

8/29/2013 4:21 PM	Rate (0)
rdoliveira Gold Member Joined: 4/26/2012 Last visit: 11/5/2024 Posts: 1560 Rating: (169)	ok, and the family has no MSS Ethernet communication? with the new computers, are without the serial port, so we have to use a usb adapter
	"Always make a backup before and check the best time before testing." Obrigado.
Suggestion To thank Quote Answer

8/30/2013 8:26 AM	Rate (0)
LesPaul Posts: 467 Rating: (59)	hello,there is a USB-PC cable available with order number: 3UF7941-0AA00-0 Regards LesPaul
LesPaul Posts: 467 Rating: (59)
Suggestion To thank Quote Answer

8/30/2013 4:48 PM	Rate (0)
rdoliveira Gold Member Joined: 4/26/2012 Last visit: 11/5/2024 Posts: 1560 Rating: (169)	ok, so I do not need adapter. thank you
	"Always make a backup before and check the best time before testing." Obrigado.
Suggestion To thank Quote Answer

10/3/2013 9:32 PM	Rate (0)
rdoliveira Gold Member Joined: 4/26/2012 Last visit: 11/5/2024 Posts: 1560 Rating: (169)	is it possible??, if I have a profibus connected to MSS Sirius, which is connected to my CLP, and I being connected by ethernet to clp, I communicate with sirius in profibus?
	"Always make a backup before and check the best time before testing." Obrigado.
Suggestion To thank Quote Answer

10/7/2013 11:29 AM	Rate (1)
LesPaul Posts: 467 Rating: (59)	hello rdoliveira, Routing through PLC is not possible because this requires S7-Routing information at SIMATIC S7 which is only possible by integration of device using Object Manager (S7-Slave) like there is for SIRIUS Softstarter 3RW44 or SIMOCODEpro. For MSS there is no Object Manager available.So the possibilities you have:- Using a PC with MSS ES conntected diretly to the PROFIBUS line where MSS is connected.- Using a PC with USB PC-Cable connected to the system interface of MSS regards LesPaul
LesPaul Posts: 467 Rating: (59)
Suggestion To thank Quote Answer
This contribution was helpful to 1 thankful Users rdoliveira

10/7/2013 12:57 PM	Rate (0)
rdoliveira Gold Member Joined: 4/26/2012 Last visit: 11/5/2024 Posts: 1560 Rating: (169)	OK. well explained.
	"Always make a backup before and check the best time before testing." Obrigado.
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on