Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

Recipe

Created by: Zefir at: 11/20/2013 8:09 PM (2 Replies)

Rating (0)

Thanks 0

3 Entries

11/20/2013 8:09 PM	Rate (0)
Zefir Bronze Member Joined: 9/16/2009 Last visit: 8/13/2020 Posts: 89 Rating: (3)	Hi everyone ! I would like to ask aboutcertain issue. I have Comfort Panel, PLC-S7300 I'm going to prepare recipe,like that: Recipe includefour predefine type of steps: For example: Step 1 - Heating, Step 2 - Cooling, Step 3 - Mixing, Step 4 - Charging. Each stepsinclude some parameters. My question is: It is possible to prepare Recipe in Comfort Panelwith that structure: Recipe Name: Step 1:TYPE:HEATING: ParameterA=10 Parameter B=10 Step 2: TYPE :COOLING: ParameterC=10 ParameterD=10 Step 3:TYPE:HEATING: ParameterA=20 Parameter B=15 Step 4: TYPE :HEATING: ParameterA=30 ParameterB=40 Step 5:TYPE: MIXING : ParameterA=10 Parameter B=10 Step 6: TYPE :COOLING: ParameterE=10 ParameterF=10 Reassuming I have few steps with different type (function). Best Regards Zefir

Suggestion To thank

11/21/2013 8:48 AM	Rate (0)
Zefir Bronze Member Joined: 9/16/2009 Last visit: 8/13/2020 Posts: 89 Rating: (3)	Hi. Nobody is able to help me ??? Regards Zefir

Suggestion To thank

11/25/2013 8:05 AM	Rate (0)
O_Moderator Diamond Member Joined: 4/24/2009 Last visit: 8/20/2024 Posts: 2682 Rating: (135)	Thread closed, because question is already discussed in the following thread Recipe with steps Best regards O_Moderator
	Tips&Tricks for the forum usage
Suggestion To thank

|

Share this page:

Share this page on...

Related topics by keywords:

TIA WinCC Adv Archives / Recipes

Follow us on