Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

Sinamics S120 text library for Wincc2008 sp3

Created by: Timmy12345 at: 5/14/2013 11:37 AM (4 Replies)

Rating (1)

Thanks 0

5 Entries

5/14/2013 11:37 AM	Rate (1)
Timmy12345 Posts: 61 Rating: (1)	Hello I want to insert error messages of sinamics s120 in a wincc flexible project (Wincc 2008 sp3). Where can i find the text list for wincc 2008 sp3? I have tried to use the text lists for wincc2008 and wincc 2008 sp2 but it is not possible for me to drag and drop them in the text list menu (see picture attached). Any solution for this? I want to use the text list to generate analog alarms to display fault code and text in alarm window.
Timmy12345 Posts: 61 Rating: (1)
Suggestion To thank Quote Answer

5/14/2013 3:00 PM	Rate (0)
Tweety Posts: 3037 Rating: (192)	Hello, How do you insert error messages of a frequency converter (SINAMICS and MICROMASTER) in a WinCC flexible or WinCC (TIA Portal) project? Tweety
Tweety Posts: 3037 Rating: (192)
Suggestion To thank Quote Answer

5/15/2013 10:44 AM	Rate (0)
Timmy12345 Posts: 61 Rating: (1)	I have already used this webpage, but as i explained there is only text lists for wincc2008 and 2008 sp2, i am using wincc 2008 sp3. I am not able to create text lists with the ones on this page or am i doing something wrong and is supposed to be able to use them. I does not specifically say the procedure to use the library to create text list, but isnt it drag and drop?
Timmy12345 Posts: 61 Rating: (1)
Suggestion To thank Quote Answer

5/15/2013 12:32 PM	Rate (0)
Tweety Posts: 3037 Rating: (192)	Hello Timmy12345, You can use the library file of WinCC flexible 2008 SP2. The library migrate to WinCC flexible 2008 SP3 at opening the library with WinCC flexible 2008 SP3. Tweety
Tweety Posts: 3037 Rating: (192)
Suggestion To thank Quote Answer

4/21/2014 1:18 PM	Rate (0)
SieMuzzy Posts: 59 Rating: (2)	Hi Timmy12345 I came across this problem one day ago so you have to try to drag and drop onto Anolog alarms of the general view with G120 alarm library. it wants to create all connection paramters like textlist, connect tags and internal tags. Therefore you can darg and drop on the general view instate of Anolog alarm or textlist. I hope so it can solve your problem, best regrads
SieMuzzy Posts: 59 Rating: (2)
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on