Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

spare cpu414 414-3EM05-0AB0

Created by: A Dhiman at: 7/19/2014 12:53 PM (2 Replies)

Rating (0)

Thanks 2

3 Entries

7/19/2014 12:53 PM	Rate (0)
A Dhiman Posts: 5 Rating: (0)	Dear Sir, I have fresh new cpu414 model:414-3EM05-0AB0 , how i can asign ip address to this device so that i can down load my program,.
A Dhiman Posts: 5 Rating: (0)
Suggestion To thank Quote Answer

7/21/2014 8:09 PM	Rate (0)
jklm Platinum Member Joined: 12/22/2006 Last visit: 1/25/2022 Posts: 1742 Rating: (309)	Hello, In STEP 7, you can use the menu function "PLC -> Edit Ethernet Node ..." to search a network for SIMATIC communication modules. The search covers Ethernet CPs, network components as well as S7 CPUs with integrated PROFINET interface. Then you can select one of these nodes. Via the "Assign IP Configuration" button you assign a new IP configuration to the module selected.
	Best regards jklm Suggestion was helpful? Feel free to rate it.
Suggestion To thank Quote Answer
This contribution was helpful to 2 thankful Users H-H hdhosseini

7/22/2014 10:38 AM	Rate (0)
A Dhiman Posts: 5 Rating: (0)	thanks sir
A Dhiman Posts: 5 Rating: (0)
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on