Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

CP 440 in H system

Created by: Rudrani at: 8/1/2014 11:05 AM (1 Replies)

Rating (0)

Thanks 1

2 Entries

8/1/2014 11:05 AM	Rate (0)
Rudrani Posts: 163 Rating: (4)	Hi, I am new to H system Configuration and programming. H system has following hardware: CPU 412-5H PN/DP Two CP 440 (one for master system & other for standby) My task is to transfer data to Some other CPU in the network through CP440. I have downloaded the CP_Ptp library. There I have got the send, recv blocks for CP440. In that Block, I have to enter the HW address of CP. Now my problem is, address of which CP is to be entered in the block? Or Should I write some logic to identify Master CPU & use the address of CP of master system only? Regards, Rudrani
Rudrani Posts: 163 Rating: (4)	Last edited by: Rudrani at: 8/1/2014 11:05 AM
Suggestion To thank Quote Answer

8/5/2014 7:18 AM	Rate (0)
Aret Posts: 2348 Rating: (264)	Generally you can define master via SFC51 and use appropriate HW address.
Aret Posts: 2348 Rating: (264)
Suggestion To thank Quote Answer
This contribution was helpful to 1 thankful Users Rudrani

|

Share this page:

Share this page on...

Follow us on