Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

Writing S5 eeproms with Fild PG

Created by: nkraven at: 1/5/2006 9:47 AM (3 Replies)

Rating (0)

Thanks 0

4 Entries

1/5/2006 9:47 AM	Rate (0)
nkraven Posts: 15 Rating: (1)	I was trying to write to a s5 eeprom with my Field PG and i was unable to do do this. Is it realy necesary to have a S5 adapter as it says in the field pg documentation?
nkraven Posts: 15 Rating: (1)
Suggestion To thank Quote Answer

1/5/2006 10:17 AM	Rate (0)
SteveJ Posts: 328 Rating: (29)	Dear Sir, Its does depend on your application. but generally speaking, yes, the adapter that was supplied with your PG is required. Best regards Steve
SteveJ Posts: 328 Rating: (29)
Suggestion To thank Quote Answer

1/5/2006 10:30 AM	Rate (0)
nkraven Posts: 15 Rating: (1)	teh big problem is that i didnt receive this adapter...and now it seems that i need it...should this adapter have been suplid in a standard basis choice of a field PG? or its an optional feature
nkraven Posts: 15 Rating: (1)
Suggestion To thank Quote Answer

1/8/2006 10:12 AM	Rate (0)
SteveJ Posts: 328 Rating: (29)	Hi As far as i am aware the adapter is supplied as part of standard equipment. The part number is 6ES7798-0CA00-0XA0 should you need to order a replacement. SteveJ
SteveJ Posts: 328 Rating: (29)
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on