Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

Function Screen

Created by: azrael at: 10/30/2007 4:03 AM (2 Replies)

Rating (1)

Thanks 0

3 Entries

10/30/2007 4:03 AM	Rate (0)
azrael Posts: 45 Rating: (4)	hi, need help onhow to enable function screen in OP27?
azrael Posts: 45 Rating: (4)
Suggestion To thank Quote Answer

10/30/2007 8:48 AM	Rate (1)
The Brain Gold Member Joined: 10/19/2005 Last visit: 11/30/2020 Posts: 1611 Rating: (121)	Hi, what did you mean with function screen? Did you mean the screen like "Z_BACKUP" or "Z_SYSTEM_MEN"? If you create a knew OP27 project then use the complete wizard (in german the button "weiter >") After then you get a flag which you can use "Use Standard Project". If you select this, then you get theStandard screenfor the OP27. (You can copy this screen into your project.) regards,

Suggestion To thank Quote Answer

10/31/2007 4:40 AM	Rate (0)
azrael Posts: 45 Rating: (4)	hi, that's exactly what i need, thanks alot!
azrael Posts: 45 Rating: (4)
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on