Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

VIPA

Created by: R&H CO. at: 12/2/2011 11:44 AM (4 Replies)

Rating (1)

Thanks 1

5 Entries

12/2/2011 11:44 AM	Rate (0)
R&H CO. Posts: 67 Rating: (0)	hi everyone is there anyonehas deal with VIPA PLC cause i know it use STEP-7 software but i can`t view the program with my PC ??
R&H CO. Posts: 67 Rating: (0)
Suggestion To thank Quote Answer

12/2/2011 11:53 AM	Rate (1)
UMENCHO Diamond Member Joined: 3/21/2006 Last visit: 11/1/2024 Posts: 10229 Rating: (1181)	Hello, Yes, is possible to use Step7 in order to program VIPA CPU. What do you have there like a hardware and did you receive an errors? And I suggest you to contact with VIPA service. Best regards, Hristo Mihalev
	Last edited by: UMENCHO at: 12/2/2011 11:55 AM
Suggestion To thank Quote Answer
This contribution was helpful to 1 thankful Users Tomy Master

10/30/2013 2:49 AM	Rate (0)
bullet3255 Posts: 18 Rating: (0)	how to install the vipa software in to simatic step7? anybody having link for vipa software? kindly post it
bullet3255 Posts: 18 Rating: (0)
Suggestion To thank Quote Answer

10/30/2013 8:44 AM	Rate (0)
Marcjan Platinum Expert Joined: 4/22/2010 Last visit: 11/18/2024 Posts: 5697 Rating: (715)	Hello, What software must be installed in Step7 Did you have a look at Vipa Site ? regards, Marcjan
	Problem solved? Please let us know! Please no technical questions by PM, use the forum sections for your questions.
Suggestion To thank Quote Answer

10/16/2014 1:11 PM	Rate (0)
Min_Moderator Platinum Member Joined: 9/3/2014 Last visit: 3/13/2019 Posts: 4766 Rating: (122)	New question published bybehroz is split to a separate thread with the subject i can not configuration vipa plc as slave. Best regards Min_Moderator

Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on