Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

what is the reason CTRL + X does not work?

Created by: hassub12 at: 11/26/2014 6:41 AM (3 Replies)

Rating (0)

Thanks 1

4 Entries

11/26/2014 6:41 AM	Rate (0)
hassub12 Regular Member Joined: 11/26/2014 Last visit: 11/18/2024 Posts: 1 Rating: (0)	Hi I use step7 v13 but CTRL+Xdisabled why?? Attachment 34.jpg (184 Downloads)

Suggestion To thank Quote Answer
This contribution was helpful to 1 thankful Users rdoliveira

11/28/2014 1:34 PM	Rate (0)
Jonesee Advanced Member Joined: 11/17/2009 Last visit: 11/17/2024 Posts: 24 Rating: (3)	Don't know the reason but I have a similar problem. Get around by copying then deleting. Maybe to do with system resources because I have a similar problem were sometimes undo stops working(?).

Suggestion To thank Quote Answer

11/28/2014 2:57 PM	Rate (0)
rdoliveira Gold Member Joined: 4/26/2012 Last visit: 11/18/2024 Posts: 1561 Rating: (169)	good question, for me the v12 and v13 version does not run the Ctrl + x
	"Always make a backup before and check the best time before testing." Obrigado.
Suggestion To thank Quote Answer

11/28/2014 3:28 PM	Rate (0)
Usab Posts: 33 Rating: (4)	Cut is not working in many places in TIAP, there are many technical reasons behind it, Undo is one of them. The entry exists disabled to keep a stable context menu. Usab
Usab Posts: 33 Rating: (4)
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on