Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

Please Help.......DC Drive Field Weakening

Created by: LTE_Babar at: 12/11/2013 12:31 PM (2 Replies)

Rating (0)

Thanks 0

3 Entries

12/11/2013 12:31 PM	Rate (0)
LTE_Babar Posts: 16 Rating: (0)	Hi All, We are retrofitting an old CNC machine which have Siemens 60KW DC Drive 6RA2675-6DV57-0 TYP: D380/190Mreq-GcGF6V57-2E.1. There is a terminal 107 which, in the machine's electrical manual is shown as something like field weakening but we don't know exactly what is the function of this ....Does it enable Field weakening or something else? If someone know about the function of this Input please let me know, also it would be great help if someone have the Manual of this DC Drive. Regards Babar
LTE_Babar Posts: 16 Rating: (0)
Suggestion To thank Quote Answer

12/11/2013 3:25 PM	Rate (0)
KSN Platinum Expert Joined: 8/25/2006 Last visit: 11/17/2024 Posts: 2211 Rating: (280)	Hello. For manual look at thisthreadandthis.

Suggestion To thank Quote Answer

1/29/2015 11:35 AM	Rate (0)
Min_Moderator Platinum Member Joined: 9/3/2014 Last visit: 3/13/2019 Posts: 4766 Rating: (122)	New question published byMahi@038 is split to a separate thread with the subject parameterization doing field weakening in Sinamais DCM. Best regards Min_Moderator

Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on