Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

Product changes notification, how to configure ?

Created by: Panov69 at: 3/27/2015 5:14 PM (2 Replies)

Rating (0)

Thanks 0

3 Entries

3/27/2015 5:14 PM	Rate (0)
Panov69 Silver Member Joined: 11/17/2010 Last visit: 9/12/2024 Posts: 216 Rating: (40)	Hi, I would like to know how configure notification if product change firmware , E-Stand or discontinuation. I can not find how to do it. Regards.

Suggestion To thank Quote Answer

3/30/2015 9:29 AM	Rate (0)
Min_Moderator Platinum Member Joined: 9/3/2014 Last visit: 3/13/2019 Posts: 4766 Rating: (122)	Hello Panov69, I already answered a similar question here Service pack update alerts, I think this will also solve your problem. If this thread doesn't fit please let me know. Best regards Min_Moderator

Suggestion To thank Quote Answer

4/9/2015 3:27 PM	Rate (0)
Min_Moderator Platinum Member Joined: 9/3/2014 Last visit: 3/13/2019 Posts: 4766 Rating: (122)	New question published by Nemcha is split to a separate thread with the subject Implement fuzzy logic controler with Siemens S7-1200. Best regards Min_Moderator

Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on