Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

Simatic S7400 hardware issue

Created by: ach at: 1/16/2016 3:05 PM (4 Replies)

Rating (0)

Thanks 0

5 Entries

1/16/2016 3:05 PM	Rate (0)
ach Regular Member Joined: 8/23/2011 Last visit: 12/5/2019 Posts: 19 Rating: (0)	Dear Tech team, I have upload S7400 program but it not shows CPU rack and slot no. Also I am unable to compile the program. Regards, Ach Attachment IMG_20160106_171540.jpg (195 Downloads)

Suggestion To thank Quote Answer

1/16/2016 3:17 PM	Rate (0)
#EIC# Advanced Member Joined: 5/19/2015 Last visit: 5/31/2024 Posts: 21 Rating: (0)	Hi, Have you used the Upload station to PG function? Do you have an updated hardware library on your console?

Suggestion To thank Quote Answer

1/17/2016 10:36 PM	Rate (0)
MAZENJER Silver Member Joined: 8/31/2013 Last visit: 11/8/2024 Posts: 607 Rating: (41)	You need to install the GSD file of 11UG device to able upload and download perfectly... also be sure about your setting in PC/PG interface
	Warm Regards MAZENJER
Suggestion To thank Quote Answer

1/20/2016 4:33 AM	Rate (0)
ach Regular Member Joined: 8/23/2011 Last visit: 12/5/2019 Posts: 19 Rating: (0)	Dear tech team, Pg/PC settings are Ok. Also UG series h/w is already installed. CPU shows intf error. Also OEM program and uploaded program having same compiling error. So kindly suggest.

Suggestion To thank Quote Answer

1/20/2016 7:08 AM	Rate (0)
UMENCHO Diamond Member Joined: 3/21/2006 Last visit: 11/1/2024 Posts: 10229 Rating: (1181)	Hello, Attach here more screens with upload process steps. DO you receive an error/warning during upload? Do you the same installation of Step7 before? Best regards, Hristo Mihalev

Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on