Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

It's possible to upgrade the version E02 to E03 for simocode pro V?

Created by: CJG at: 4/11/2008 5:15 PM (2 Replies)

Rating (0)

Thanks 0

3 Entries

4/11/2008 5:15 PM	Rate (0)
CJG Posts: 22 Rating: (0)	Hello everybody, Who know if it's possible to upgrade the version E02 to E03 for simocode pro V?, Because I have a problem with the Operator Panel with display(OPD 3UF7210-1AA00-0), in the manual say "this device can only be used a basic unit (simocode proV) from product version E03" but I have one simocode pro V 3UF7010-1AU00-0 WITH E02, there will be any solution?? Best regards
CJG Posts: 22 Rating: (0)
Suggestion To thank Quote Answer

4/11/2008 5:28 PM	Rate (0)
3UF Posts: 11 Rating: (0)	No, there is no solution. An upgrade is not possible.
3UF Posts: 11 Rating: (0)
Suggestion To thank Quote Answer

4/15/2008 6:59 PM	Rate (0)
CJG Posts: 22 Rating: (0)	thanks
CJG Posts: 22 Rating: (0)
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on