9/14/2016 10:51 PM | |
Joined: 1/21/2016 Last visit: 4/22/2023 Posts: 83 Rating:
|
is it possible to upload c7 626 dp with simatic and protool by mpi adapter ? |
Amr Ali |
|
9/15/2016 12:51 AM | |
Joined: 9/27/2006 Last visit: 9/10/2024 Posts: 12282 Rating:
|
Hello amrelhajali; You can upload the PLC program through MPI or DP cables. The OP part is based on a very old version of Simatic panels, and you cannot upload it. See the following discussion (and the documents inside). How to upload program from Simatic C7-626 https://support.industry.siemens.com/tf/ww/en/posts/107340/ Hope this helps, Daniel Chartier |
9/15/2016 9:37 AM | |
Joined: 1/21/2016 Last visit: 4/22/2023 Posts: 83 Rating:
|
thanks Daniel :) |
Amr Ali |
|
Follow us on