Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

Reïntegration of F-DO

Created by: Import-User-1 at: 8/29/2005 3:53 PM (1 Replies)

Rating (0)

Thanks 0

2 Entries

8/29/2005 3:53 PM	Rate (0)
Import-User-1 Posts: 3609 Rating: (29)	Why does it take so long for a F-DO to reintegrate, even if the fault/error has been eliminated after a few seconds???
Import-User-1 Posts: 3609 Rating: (29)
Suggestion To thank Quote Answer

8/29/2005 3:54 PM	Rate (0)
Import-User-2 Silver Member Joined: 8/10/2005 Last visit: 4/9/2024 Posts: 1486 Rating: (32)	When ACK_NEC = 0, automatic reintegration takes place as soon as the F-system detects that the fault has been eliminated. For F-I/O with inputs, reintegration takes place right away. For F-I/O with outputs, or inputs and outputs, depending on the F-I/O applied, reintegration can take place several minutes after completion of necessary test signal inputs used by the F-I/O to determine that the fault has been eliminated. all information for reintegration are in the manual "Distributed Safety"

Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on