what is the updated link for this blended learning tutorials? I can't open the link i.e plc for beginner Thank you.

blended learning

Hello qdba;

Try this link for the Sitrain PLCs for beginners online class:

https://sitrain.automation.siemens.com/DE/sitrain/Course_WT-SPSEIN_PLCs%20for%20Beginners.aspx?HTTPS=REDIR&courseLanguage=EN

For further blended training from Sitrain, see for example:

https://sitrain.automation.siemens.com/DE/sitrain/Course_ST-PRO1_SIMATIC%20S7%20Programming%201.aspx?HTTPS=REDIR&courseLanguage=EN&AppLang=en&CourseID=1002705

This blended-learning course combines Web-based training (WBT) on the Internet with a 5-day attendance course: To prepare you for the attendance component, you will receive the WBT "PLC Knowledge for First-Time Users". For an optimized post processing of the attendance course you get the WBT "RPOFIBUS". By using these learning media, you increase your personal learning success in the attendance course.

If you would like to discover (free downloadable) turorials from Siemens covering Step 7 Classic (v5.5) and TIA Portal, introduction to PCS 7 and Logo! controllers, see the following link:

https://www.automation.siemens.com/mcms/sce/en/advanced_training/training_material/TIA-Portal-Module/Pages/Default.aspx

Hope this helps,

Daniel Chartier

dchartier

Hello qdba;

Try this link for the Sitrain PLCs for beginners online class:

https://sitrain.automation.siemens.com/DE/sitrain/Course_WT-SPSEIN_PLCs%20for%20Beginners.aspx?HTTPS=REDIR&courseLanguage=EN

For further blended training from Sitrain, see for example:

https://sitrain.automation.siemens.com/DE/sitrain/Course_ST-PRO1_SIMATIC%20S7%20Programming%201.aspx?HTTPS=REDIR&courseLanguage=EN&AppLang=en&CourseID=1002705

This blended-learning course combines Web-based training (WBT) on the Internet with a 5-day attendance course: To prepare you for the attendance component, you will receive the WBT "PLC Knowledge for First-Time Users". For an optimized post processing of the attendance course you get the WBT "RPOFIBUS". By using these learning media, you increase your personal learning success in the attendance course.

If you would like to discover (free downloadable) turorials from Siemens covering Step 7 Classic (v5.5) and TIA Portal, introduction to PCS 7 and Logo! controllers, see the following link:

https://www.automation.siemens.com/mcms/sce/en/advanced_training/training_material/TIA-Portal-Module/Pages/Default.aspx

Hope this helps,

Daniel Chartier

 Thank you for the links Sir.

Hi,

for Step 7 V5.5 I think it´s a nice manuel:

SIMATIC Working with STEP 7 V5.5

 Regards,

Towome