Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

The mnemonic is locked for WinCC flexible

Created by: AMINE90 at: 7/19/2017 9:03 PM (2 Replies)

Rating (0)

Thanks 0

3 Entries

7/19/2017 9:03 PM	Rate (0)
AMINE90 Posts: 2 Rating: (0)	Hello everyone I did a program on step 7, I integrated it on wincc flexible When defining the button enter and exit on my desk I had two errors Error: No connection to the PLC "\ Step7 \ wincc step 7 \ SIMATIC 300 (1) \ CPU 313" found! Error: The mnemonic is locked for WinCC flexible or the 64 K threshold of a source has been exceeded! Help me please thank you
AMINE90 Posts: 2 Rating: (0)
Suggestion To thank Quote Answer

7/20/2017 7:35 AM	Rate (0)
amankk123123 Posts: 142 Rating: (2)	Dear bro have u defined connection of hmi with PLC in Wincc flexible?
amankk123123 Posts: 142 Rating: (2)	Last edited by: amankk123123 at: 7/20/2017 7:36:01 AM
Suggestion To thank Quote Answer

7/20/2017 11:53 AM	Rate (0)
AMINE90 Posts: 2 Rating: (0)	Hi bro Yes I defined the connection between the Flexible wincc and Step 7 I use the PLC simulator.
AMINE90 Posts: 2 Rating: (0)
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on